Effect of carbon nanotubes addition on electrochemical performance and thermal stability of Li4Ti5O12 anode in commercial LiMn2O4/Li4Ti5O12 full-cell

Li₄Ti₅O₁₂ (LTO)/carbon nanotubes (CNTs) composite material is synthesized based on a solid-state method by sand-milling, spray-drying and calcining at 850 ℃ under N₂ flow. The LTO/CNTs samples with 1 wt% and 3 wt% weight ratio of CNTs addition and the pristine LTO sample are prepared. The rate performance and the thermal stability of these samples are investigated based on LiMn₂O₄ (LMO)/LTO full-cell. The results show that theweight ratio of CNTs addition has distinct effect on LTO performances. The composite materials of LTO composited CNTs have better performance at high-rate due to the intercalation enhancement by conductive network of CNTs. At second, the overcharging temperature response of the cell's surface with 1 wt% CNTs addition is the lowest. The particle size distribution is measured and the most uniform particles are obtained with 1 wt% CNTs addition. This trend could explain that the mediumquantity of CNTs is optimal to improve the heat and mass transfer and prevent the problems of crystallite growing interference and aggregation during the calcination process.     

Synthesis,Structure, and Properties of SrC(NH)3, a Nitrogen‐Based Carbonate Analogue with the Trinacria Motif

Strontium guanidinate, SrC(NH)₃, the first compound with a doubly deprotonated guanidine unit, was synthesized from strontium and guanidine in liquid ammonia and characterized by X‐ray and neutron diffraction, IR spectroscopy, and density‐functional theory including harmonic phonon calculations. The compound crystallizes in the hexagonal space group P6₃/m, constitutes the nitrogen analogue of strontium carbonate, SrCO₃, and its structure follows a layered motif between Sr²⁺ ions and complex anions of the type C(NH)₃^2?; the anions adopt the peculiar trinacria shape. A comparison of theoretical phonons with experimental IR bands as well as quantum‐chemical bonding analyses yield a first insight into bonding and packing of the formerly unknown anion in the crystal.     

SrMoO_4∶Sm~(3+),Na~+红色荧光粉的形貌调控和发光性能

以Sm~(3+)为激活剂,Na~+为电荷补偿剂,柠檬酸为配位剂,乙二醇作为辅助配位剂,采用溶胶-凝胶法合成前驱体,然后在800℃下焙烧,成功制备了一系列SrMoO_4∶Sm~(3+),Na~+红色荧光粉。用X射线衍射仪、扫描电镜、荧光光谱和傅里叶变换红外光谱等手段对样品的物相、形貌、组成、发光性能和量子效率等进行测试和表征。分析结果表明:制备的SrMoO_4∶Sm~(3+),Na~+荧光粉均为四方晶系结构,掺杂离子的加入对基质晶体结构影响不大。在403 nm近紫外光激发下,产物有4个发射峰,分别位于563、600、647和707 nm处,归属于~5G_(5/2)→~6HJ(J=5/2,7/2,9/2,11/2)的电子跃迁,其中位于647 nm处的主发射峰的相对发光强度最大。当Sm~(3+)的掺杂物质的量分数为1%~3%时,发光强度最好,当浓度超过1%~3%时,会发生荧光猝灭。对实验数据进行分析,确定荧光猝灭机理是由于钐离子间交换作用引起的,并计算了能量传递的临界距离为1.77~2.56 nm。此外,还详细研究了乙二醇对SrMoO_4∶Sm~(3+),Na~+荧光粉形貌的影响,研究结果表明:乙二醇加入量为5 m L时,产物形貌均匀,呈球形或椭球形;且分散性较好;荧光强度最大。     

Recent development of aminophosphine chalcogenides and boranes as ligands in s-block metal chemistry

The coordination chemistry of the aminophosphine chalcogenide ligands [Ph₂P(O)NHR], [Ph₂P(S)NHR], and [Ph₂P(Se)NHR] (R = 2,6-Me₂C₆H₃,^tBu, CHPh₂, CPh₃) or corresponding borane derivative [Ph₂P(BH₃)NHR] toward group 1 and 2 metals is reviewed. The structural characterization of a huge number of mono- and bis-aminophosphine chalcogenide/borane complexes with group 1 and 2 metals—in most cases lithium, sodium, potassium, magnesium, calcium, strontium, and barium complexes—reveals a poly-metallacyclic motif in each case. The coordination takes place from adjacent chalcogen/borane and nitrogen as donor atom or group of the ligand confirming the direct bond between metal and chalcogen/borane to develop homoleptic and heteroleptic complexes. The heteroleptic group 2 metal complexes were used as pre-catalysts in hydrophosphination and hydroamination reactions. Similarly, aminophosphine chalcogenide alkaline earth metal complexes were used in the catalytic ring-opening polymerization (ROP) study of ?-caprolactone.     

An adsorption study of Sr2+ from saline sources by coconut shell charcoal

The adsorption potential of charcoal for the removal of heavy metal ions is well documented in the literature. However, its exploration for uptake of technologically valuable metal ions such as Sr²⁺ is poorly known. In this work, the batch adsorption study of Sr²⁺ ion from aqueous solution as well as from saline matrix (>3% of NaCl) onto charcoal has been carried out. The experiments were conducted with two charcoals, i.e., our prepared charcoal (coconut shell charcoal) and commercial charcoal. Strontium adsorption has been investigated as a function of its initial concentration, contact time, and varied mass of adsorbent. Equilibrium adsorption data were evaluated for Langmuir and Freundlich isotherm models. The adsorption capacities (mg/g) of Sr²⁺ present in the salt matrix onto coconut shell charcoal and commercial charcoal was found to be 18.4 and 22.2, respectively. Uptake of Sr²⁺ from subsoil brine onto coconut shell charcoal has been successfully demonstrated in this work.     

Barium Titanate-reinforced Acrylonitrile-Butadiene Rubber: Synergy Effect of Carbon-based Secondary Filler

Acrylonitrile rubber(NBR) composites filled with barium titanate(BT) were prepared using an internal mixer and a two-roll mill. Also, a secondary filler, namely carbon nanotubes(CNT), was added in order to find a potential synergistic blend ratio of BT and CNT. The cure characteristics, tensile and dielectric properties(dielectric constant and dielectric loss) of the composites were determined. It was found that NBR/BT composites with CNT secondary filler, at a proper BT:CNT ratio, exhibited shorter scorch time(t_(s1)) and cure time(t_(c90)) together with superior tensile properties and reinforcement efficiency, relative to the one with only the primary filler. In addition, the NBR/BT-CNT composite with 80 phr BT and 1-2 phr CNT had dielectric constant of 100-500, dielectric loss of 12-100 and electrical conductivity below 10~(-4) S/m together with high thermal stability. Thus, with a proper BT:CNT mix and filler loading, we can produce mechanically superior rubber composites that are easy to process and low-cost, for flexible dielectric materials application.     

A sonochemical synthesis of SrTiO3 supported N-doped graphene oxide as a highly efficient electrocatalyst for electrochemical reduction of a chemotherapeutic drug

A sonochemical based green synthesis method playa powerful role in nanomaterials and composite development. In this work, we developed a perovskite type of strontium titanate via sonochemical process. SrTiO₃ particles were incorporated with nitrogen doped graphene oxide through simple ultrasonic irradiation method. The SrTiO₃/NGO was characterized by various analytical methods. The nanocomposite of SrTiO₃/NGO was modified with laser-induced graphene electrode (LIGE). The SrTiO₃/NGO/LIGE was applied for electrochemical sensor towards chemotherapeutic drug detection (nilutamide). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques have been used to examine the electrochemical performance of nilutamide (anti-cancer drug). DPV was found to be more sensitive and found to exhibit a sensitivity 8.627 µA µM⁻¹ cm⁻² for SrTiO₃/NGO/LIGE with a wide linear range (0.02–892 µM) and low Limit of detection (LOD: 1.16 µM). SrTiO₃/NGO/LIGE has been examined for the detection of nilutamide in blood serum and urine samples and obtained a good recovery in the range of 97.2–99.72 %. The enhanced stability and selectivity and practical application results indicates the suitability of SrTiO₃/NGO/LIGE towards the detection of nilutamide drug in pharmaceutical industries.     

Cross‐linking and properties of rubber magnetic composites cured with different curing systems

Rubber magnetic composites were prepared by incorporation of strontium ferrite into rubber compounds based on acrylonitrile butadiene rubber and ethylene propylene diene monomer rubber. The sulfur, peroxide, and mixed sulfur/peroxide curing systems were introduced as cross‐linking agents for rubber matrices. The aim was to investigate the influence of curing system composition on curing process and cross‐link density of composite materials. Then, static and dynamic mechanical properties and thermal and magnetic characteristics were investigated in relation to the cross‐link density of rubber magnetic composites and structure of the formed cross‐links. The changes of dynamical and physicomechanical properties were in close correlation with the change of cross‐link density, whereas the tensile strength of magnetic composites showed increasing trend with increasing amount of peroxide in mixed curing systems. On the other hand, thermal conductivity and magnetic characteristics were found not to be dependent on the curing system composition.     

Transferkoeffizienten im System Boden—Pflanze in verschiedenen Lokalitäten der Tschechoslovakei

Für die Ermittlung der Transferkoeffizienten im System Boden–Pflanze wurden in drei Stellen der Tschechoslovakei Boden- und Pflanzenproben entnommen. Die niedrigsten Transferkoeffizienten für Getreide und für mehrjährige Futterpflanzen wurden in der Ostslovakei festgestellt. Die Werte der Transferkoeffizienten waren durch den Bodentyp, den Gesamt-Sorptionskapazität und dem Grad der Sorptionssättigung beeinfluβt.

Soil and plant samples were sampled for the determination of soil to plant transfer coefficients in three various Czechoslovak sites. The lowesl transfer factors for cereals and fodder were determined in the site of Eastern Slovakia. Values of transfer factors depend on soil type, cation exchange capacity and base saturation of soils.     

Effect of B-site isovalent doping on electrical and ferroelectric properties of lead free bismuth titanate ceramics

In the present work, zirconium modified bismuth titanate ceramics have been studied as potential lead-free ferroelectric materials over a broad temperature range (RT – 800 °C). Polycrystalline samples of Bi₄Ti_3−xZr_xO₁₂ (x=0.2, 0.4, 0.6) (BZrT) with high electrical resistivity were prepared using the solution combustion technique. The effect of Zr doping on the crystalline structure, ferroelectric properties and electrical conduction characteristics of BZrT ceramics were explored. Addition of zirconium to bismuth titanate enhances its dielectric constant and reduces the loss factor as it introduces orthorhombic distortion in bismuth titanate lattice which is exhibited by the growth along (0010) lattice plane. Activation energy due to relaxation is found to be greater than that due to conduction thus confirming that electrical conduction in these ceramics is not due to relaxation of dipoles. Remanent polarization of the doped samples increases as the Zirconium content increases.